Winan Industrial Limited
Winan Industrial Limited Your Safety , My Promise
Add to Cart
Zsfz 80/100/150/200 Wet Type Alarm Valve for Fire Sprinkler System
Wet Alarm Check Valve Introduction:
The ZSFZ wet alarm valve is a one-way valve that only allows water to flow into the water spray system
in one direction and alarms at a specified flow rate. and drive the matching part to alarm at prescribed
pressure and flow. It constitutes the sprinkler system with water flow inductor, pressure switch and
sprinklers. This valve is divided into two sides by a valve flap. The above side is connected with system
pipeline ant the underside is connected with water supply. The valve flap will open only when the pressure
between the two parts reach a certain level.
Characteristics and Functions:
| Model | ZSFZ |
| Type | Wet fire alarm valve |
| Material | Brass, Cast Iron |
| Norminal diameter | DN100,DN150, DN200. |
| Norminal working pressure | 12bar~16bar |
| Strength test pressure | 4.8Mpa |
| Flux(l/min) | >15 |
| Structure | Safety fire alarm system |
| Power | Hydraulic fire alarm system |
| Pressure | High Pressure fire alarm system |
Parameters:
| Model | Norminal Diameter(mm) | Norminal Working Pressure(MPa) | Body Height(mm) | Flange Outer Diameter (mm) | Water Pressure Reduced | Drive Time(s) |
| ZSFZ100 | DN100 | 1.2~1.6 | 250 | 220 | <0.07 | <15 |
ZSFZ150 | DN150 | 1.2~1.6 | 270 | 285 | <0.07 | <15 |
ZSFZ200 | DN200 | 1.2~1.6 | 370 | 340 | <0.07 | <15 |
Working Principle:
The alarm valve is always on a set condition the system side is full of pressurized water. The heat
sensitive component on the sprinkler will blast and spray automatically when there is fire
somewhere. Thus the pressure at system side will reduce and then valve flap opens because of
pressure difference. One hand the water supplied to system side, on the other hand a small part of
water flows to delayer and reach water motor alarm finally to make it alarm. The pressure switch
turns pressure signal to electric signal and start fire pump and auxiliary fire-fighting equipments to
put out the fire. Water flow inductor will also work and show the position of fire.
Advantages
1. Widely use in office, school, kitchen and warehouse;
2. Work by temperature sensitive;
3. Vairous types to choose;
4. Easy install and use.
5. OEM and ODM available
1. Do you offer free sample for your clients?
Yes, we offer free sample for many of the products
2. What's the MOQ of your products?
Our MOQ is one (1) piece/set.
3. Are you manufacturer with your own factory?
Yes, we are the manufacturer for more than 20 years
4. What's your payment terms?
We accept T/T, L/C, Western Union, Paypal,etc.
5. How long is the delivery time?
Usually around 15 days after payment.
6. Do you have technical support?
Yes, we have a professional engineering team.
7. Do you have warranty?
Yes, all products have one year warranty.
8. Can you accept OEM?
Yes, we do customized design for our clients.
What we can do for you?
1)Brass fire hydrant valve;
2)Professional manufacturer;
3) We can supply these prodocts in different sizes
4) Good fire hydrant price
(5) We can offer ISO 9001-2015 certification.
(6) We can offer fast delivery time and good service.